Audio Output | 1/4" TRS stereo, headphone or line level; 1/8" TRS stereo, headphone or line level; XLR balanced mono, line level |
---|---|
Stereo Mix Outputs, Headphone/Line |
Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
Mono Mix Output | Pin 2: Hot, Pin 3: Cold; Pin 1: Ground |
A-Net | 1 A-Net In, locking RJ45 connector; Supports Power Over A-Net |
D/A Conversion | 44.1/48kHz, 24-bit |
Stereo Operation | Stereo Link, per mixer channel and A-Net channel pair Set at the input device; Variable pan per mono channel or pan/spread per stereo channel pair |
USB Storage | Save/load mix configuration data and mixer presets; Firmware updates Requires USB compliant mass storage device, formatted for PC |
Headphone Output | 1.0 watt at 100 ohms (Line/Headphone output) |
Output Impedance | 32 ohms |
Frequency Response | 2-22kHz +0.2dB/-3dB |
THD+N | < 0.003% |
Signal to Noise (unweighted) |
-106dB (measured with zero data into all channels) |
Latency | <0.680 msec (measured from analog input to analog output) |
A-Net Cables | Use unshielded Cat-5e UTP (or better) cable; Maximum 400 ft (122 m) between devices; |
Power Supply Input Voltage Plug Size |
Optional 24 VDC, 0.5 amp 2 mm |
Dimensions | 10.76 in. (273.3mm) wide x 7.6 in. (193.04mm) deep; 2.212 in. (56.18mm) high |
Weight | 2 lb (0.907 kg); packaged weight 3 lb. (1.36 kg) |
Options | MT-1a Mic Stand Mount (uses 6-32 1/4-inch screws) EB-1 Extension Bracket PS-120/PS-240 Power Supply |