Technical Specifications
Acoustical
| System Type | Dual 12” bi‐amplified subwoofer |
| Frequency Range (‐10 dB) | 34 Hz to 2.8 kHz (P.A./Reference Speaker Mode, half space) |
| Frequency Response (±3 dB) | 38 Hz to 910 Hz (P.A./Reference Speaker Mode, half space) |
| Low‐Pass Frequencies | 80 Hz, 100 Hz, 120 Hz, Off (user‐selectable) |
| Low Frequency Transducers | 2 x 12” woofer, 3” diameter voice coil, 4Ω impedance |
Electrical – Rear Panel | |
| Input Types: | Stereo Line‐level XLR‐1/4”, balanced L6 LINK™ XLR |
| Input Impedance: | 100 kΩ balanced N/A |
| Max Input Levels: | +20 dBu N/A |
| Onset of Limiting: | +11 dBu input (Reference/P.A. Speaker Mode, Master Level at center‐detent) ‐1 dBu input (Reference/P.A. Speaker Mode, Master Level at maximum) |
| Output Types | Stereo Line‐level XLR‐1/4”, balanced L6 LINK XLR |
| Output Impedances | 680 Ω balanced N/A |
| Output High‐Pass Frequencies | 80 Hz, 100 Hz, 120 Hz, Off (user‐selectable) |
| Controls | Master Level, Speaker Mode, Crossover Frequency, Polarity |
| Indicators | Signal Present/Clip, Limit, Polarity Inversion, 4x Crossover Frequency, 4x Speaker Mode, L6 LINK Status |
Digital Signal Processing | |
| Speaker Modes | P.A./Reference, P.A./High Punch, Playback/Extended Bass, Playback/Ultra Bass |
| Transducer Protection | Excursion limiting, thermal limiting |
| Digital Networking | L6 LINK Intelligent Speaker Networking System |
| Sensors | Power amp temperature, power supply temperature |
Power Amplification and Supply | |
| Output Channel | LF1 LF2 |
| Power Amplifier Type | Class D Class D |
| Peak Output Power1 | 622 Watts 622 Watts |
| Power Supply Voltage Range | 100 ‐ 240 VAC, ± 10%, 50/60 Hz , automatic voltage selection |
| Power Consumption | 250 watts (1/8th power) |
Mechanical | |
| Dimensions (HxWxD) | 867 mm x 419 mm x 591 mm |
| Weight | 37.5 kg |
