<<  본 행사는 2018년 9월 30일에 종료됩니다.

StageSource L2t

Technical Specifications

  Acoustical

System Type
10”, 2‐way, bi‐amplified loudspeaker system
Frequency Range (‐10 dB)
40 Hz to 19 kHz, (Reference/P.A. Speaker Mode, free‐field)
Frequency Response (±3 dB)
51Hz to 18kHz, (Reference/P.A. Speaker Mode, free‐field)
Maximum SPL Output
128 dB peak @ 1 meter (unweighted, measured indoors with music program material)
Coverage Pattern (‐6 dB)
100⁰ horizontal x 50⁰ vertical
Directivity Factor (Q)
9.2 (averaged 1 kHz to 16 kHz)
Directivity Index (DI)
9.6 dB (averaged 1 kHz to 16 kHz)
Crossover Frequencies
LF to HF Crossover ‐ variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
Low Frequency Transducers
10” extended range woofer, 2” diameter voice coil, 4Ω impedance
High Frequency Transducer
1” exit compression driver, 1.4” diameter voice coil and diaphragm, 8Ω impedance

Electrical – Side Panel

Input Type
2 x mic/instrument XLR‐1/4”, balanced
Input Impedance (each input)
2.63 kΩ balanced (Pad = 0 dB), 23.7 kΩ balanced (Pad = 20 dB)
Gain Range (each input)
‐infinity to +57 dB (Pad = 0 dB); ‐infinity to +37 dB (Pad = 20 dB)
Max Input Level
+25 dBu (Gain at minimum ‘on’ position, 20 dB pad on)
Controls
2x Gain, 20 dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level, Feedback Suppression On/Off/Mode

1x Dual Mono/Stereo Link Mode, Acoustic Modeling Amount, On/Off
Indicators
2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode,
1x Acoustic Modeling On/Off

Electrical – Rear Panel

Input Types:
Line‐level XLR‐1/4”, balanced               Stereo RCA, unbalanced             L6 LINK™ XLR
Input Impedance:
            100 kΩ balanced                                  20 kΩ balanced                               N/A
Max Input Levels:
                  +20 dBu                                                  +16 Dbv                                     N/A
Onset of Limiting:
+6 dBu input (Reference/P.A. Speaker Mode, Master Level control at center‐detent)
‐6 dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
Output Types
Balanced Loop Thru XLR                    Balanced Mix Out XLR                     L6 LINK XLR

             Source‐dependent                        680 Ω balanced                                 N/A
Controls
Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
Indicators
Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode,
L6 LINK Status

Digital Signal Processing

Speaker Modes
Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
On‐board Effects
Reverb, Modulation, Feedback Suppression, Acoustic Modeling
Transducer Protection
Excursion limiting, thermal limiting
Digital Networking
L6 LINK Intelligent Speaker Networking System
Sensors
Speaker orientation, pole sensor, power amp temperature, power supply,
temperature

Power Amplification and Supply

Output Channel
                           HF                                             LF                                              
Power Amplifier Type
                       Class AB                                   Class D                                    
Peak Output Power1
                     175 Watts                                 655 Watts                                  
Power Supply Voltage Range
100 ‐ 240 VAC, ± 10%, 50/60 Hz , automatic voltage selection
Power Consumption
250 watts (1/8th power)

Mechanical

Dimensions (HxWxD)
603 mm x 312 mm x 312 mm
Weight
17.7 kg