DMI-HYDRA 2This card will provide 56 Input and 56 output channels at 48kHz with Primary and Secondary (backup) optical connections.
DMI-ADCThis card provides 16 analogue inputs on 2 x 25 way “D” connectors. The ADC card is a line card only. There is no microphone amplifier or phantom power available. There is no gain control function for these inputs (only digital trim). Maximum input level +22dBu.
DMI-MADI-BThis card can be used to connect a Standard MADI stream (64 channels in and out) at 48KHz or 96KHz or an SD Series DiGiCo Rack with the appropriate connector (D-Rack, D2-Rack, SD-Rack, SD-MiNiRack)
DMI-DANTEThis card provides 64 input and 64 output channels at 48KHz and 32 input and 32 output channels at 96KHz. It is provided with Primary and Secondary (backup) Gigabit Ethernet ports for connection to the Dante network.
DMI-DACThis card provides 16 analogue outputs on 2 x 25 way “D” connectors DAC card is line level only. Maximum output level +22dBu (Digital Full Scale)
DMI-AESThis card provides 16 Inputs (8 pairs) and 16 outputs (8 pairs) on 2 x 25 way “D” connectors. All AES inputs are provided with sample rate conversion (SRC) by default. All AES outputs are synchronised to the mixer system clock.
DMI-MADI-CThis card can be used to connect a Standard MADI stream (64 channels in and out) at 48KHz or 96KHz or an SD Series DiGiCo Rack with the appropriate connector (D-Rack, D2-Rack, SD-Rack, SD-MiNiRack)
DMI-AVIOMThis card provides 16 output channels at 48kHz (with SRC) and Supports Aviom's proprietary A-Net Pro16 protocol. It has 1 Cat5e connection and faceplate DIP switched for Stereo output selection.
DMI-WAVESThis card will provide 64 input and 64 output channels at 48kHz or 96kHz to the SoundGrid Network with 2 Cat5e/Cat6 connections.
DMI-AMMThis card offers both the SD-Range and the S-Series consoles 48 channels of automatic microphone mixing which can be used in any console input channel.
DMI-METhis card offers a 40 output interface to Allen & Heath ME-1 or ME-500 Personal Mixers. Multiple personal Mixers can be connected to the DMI ME via the ME-U Hub.
DMI-MICThis card provides 8 microphone preamp inputs on a 1 x 5 way "D" connector. Each channel has individual, low noise gain control and phantom power. User interface is through a normal channel strip on your console. Maximum input level is +22dBu.
DMI-A3232This card allows S-Series Consoles to connect to the A168 STAGE Stage Rack. Each Ethercon port supports up to 32 I/O, for a total channel count of 64 I/O.
DMI-OPTOThis card allows Optocore audio over HMA, OpticalCon or ST connectors.
DMI-DANTE64@96This card provides 64 inputs and 64 outputs to the Dante network at both 48kHz and 96kHz.
A164 WALL LCDWall mounted 16 input 4 output I/O Expander 16 mic/line in and 4 line out I/O Expander using A3232 network protocol and providing [...]
A168 STAGEPortable 16 input 8 output IO Expander 16 mic/line in and 8 line out I/O Expander, using A3232 network protocol and providing add [...]
A88 GPIOGPIO Port Network Expander The 4REA4 Customised DSP Engine has 8x8 on board GPIO ports. You can extend the number of GPIO’s a [...]
ASTAR4 port A3232 Network I/O Expander The ASTAR can be used to cost effectively expand the A3232 network to local 4REA4 I/O periphera [...]
Dante A168D STAGEPortable 16 input 8 output IO Expander 16 mic/line in and 8 line out expander I/O unit,providing portable remote I/O connectivity [...]
Orange BoxDiGiCo I/O in a 2U rack unit which uses DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire.
Purple BoxDiGiCo Purple Box is a dual channel CAT5/MADI to optical convertor for the long range transmission of MADI signals.
Little Red BoxAllows you to share a D-Rack or a MADI connected rack between 2 DiGiCo consoles with a CAT5 rack connection.
HD-SDI CardSDI (serial digital interface) is a group of digital video interfaces initially standardised by SMPTE from 1989.
ADAT Input/Output Card with optical connectionsDeveloped by Alesis, the ADAT Optical Interface (or ADAT Lightpipe) can carry 8 channels of uncompressed digital audio at 48kHz along a fibre optic cable.
AES-42 Input Card for digital microphonesAES 42 is a protocol for direct digital interconnection between microphones and devices, such as digital consoles, and adds operating features so that processing internal to the microphone like filters and gain control may be controlled from a mixing console.
AES/EBU Input /Output Card (BNC)The use of XLR cables for AES3 was intended to make the interface familiar and easy to implement. However, the construction of the cable is critical to achieve longer cable runs.
AES/EBU Input Card (XLR)This card offers users 4 stereo AES input channels for the DiGiCo SD-Rack, Sd-MiNi Rack, SD-Nano Rack and 4REA4.
Dante Input/Output CardAudio over IP is becoming more and more sought after, due to the fact that it works over a standard IP network and can be sent over pre-installed infrastructure.
AES/EBU Input/Output Card with bi-directional sample rate conversionThis card offers users 4 stereo AES input channels and 4 stereo AES output channels for the DiGiCo SD-Rack, Sd-MiNi Rack, SD-Nano Rack and 4REA4.
AES/EBU Output CardThis card offers users 4 stereo AES output channels for the DiGiCo SD-Rack, Sd-MiNi Rack, SD-Nano Rack and 4REA4.
192kHz Analogue Output CardThis card provides users with 8 high quality analogue outputs for the DiGiCo SD-Rack, Sd-MiNi Rack, SD-Nano Rack and 4REA4.
DiGiCo의 최근 소식 입니다.