알림
뒤로

APSi-SUB : Arrayable Point Source.

Flyable 18" Subwoofer for APSi

Compact 18" subwoofer for installation applications, Extended frequency range down to 28 Hz (-6 dB)

  • A 18" high output subwoofer that provides powerful and extended low frequency response with immense headroom. Low port compression and optimised enclosure design give a tight, accurate bass response that is ideally suited for dance clubs and installation applications.


Main Features

  • 18” ultra low distortion woofer
  • Extended frequency range: 28 Hz – 150 Hz (-6 dB)
  • High power handling: 1,250 W (AES)
  • Maximum SPL 138 dB (peak)
  • Unique Array Keeper accessory system
  • System integration with LINUS DSP amplifiers
Specification


Type:  3-way Arrayable Point Source
Frequency response:50 Hz – 22 kHz (-6 dB)
Power handling AES peak (passive):1200 W / 4800 W
Maximum peak SPL (with LINUS14)
Low:137 dB
Mid / High:146 dB
Amplification, cabinets per amplifier:
LINUS10-C Optimum / Maximum:8/12
LINUS12C Optimum / Maximum:8/12
LINUS14 Optimum / Maximum:8/12
Dispersion horizontal:Symmetrical 120°, 90° or 60°. Asymmetrical 105°, 90° or 75°. Dependent on APS-COUPLER in use.
Dispersion vertical:20°
Components:
Low frequency:2x 10″ neodymium, water resistant cones 3″ (77 mm) voice coil, 600 W (AES) each
Mid / High frequency:9″ coaxial neodymium 20° Curved-wave-driver
Mid:3.5″ (90 mm) voice coil, 150 W (AES)
High:1.75″ (44.4 mm) voice coil, 80 W (AES)
Crossover point:500 Hz, 6300 Hz passive
Input connectors:2x Neutrik™ NL4MP
Nominal impedance:8 Ω (2+/2-)
Enclosure material:Birch plywood
Finish:Polyurea coating
Flying hardware:Integrated
IP rating (IEC 60529):IP54
Weather protection options:Standard IP55: IP55 (Amphenol connectors)
MG1 (Marine Grade 1): IP55
Dimensions (WxHxD):674 x 291 x 492 mm / 26.54 x 11.46 x 19.37″
Net weight:27 kg / 59.52 lbs

* Pink noise 6 dB crest factor. Half-space loading.