WAVES

	Certified Network Switch	etc
1	Cisco SG300-10PP
2	Cisco SG250-08 8-Port Gigabit Smart Switch
3	Cisco SG250-08HP 8-Port Gigabit PoE Smart Switch
4	HP1920-8G (JG920A) 8-port switch
5	HP 1410-16G (J9560A) 16-port switch
6	HP 1410-8G (J9559A) 8-port switch
7	HP 1405-5G (JD869A) 5-port switch
8	HP ProCurve 1810-24G (J9450A) 24-port switch
9	NETGEAR GS510TLP 10 port switch	LAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches (of the same model).
10	NETGEAR Prosafe M4100-D12G	LAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches (of the same model).
11	NETGEAR M4250 Series	LAG (Link Aggregation Group) feature is supported and can be used for a redundant connection between network switches from this series.
12	TP-Link TL-SG1016 (v10.0) 16-port switch
13	Luminex GigaCore 10 10-Port Switch	Link Redundancy (RLinkX) is supported with SoundGrid. Link Aggregation (MultiLinkX) is not supported with SoundGrid.LinkX) is not supported with SoundGrid.
14	Luminex GigaCore 16Xt 16-Port Switch	Link Redundancy (RLinkX) is supported with SoundGrid. Link Aggregation (MultiLinkX) is not supported with SoundGrid.LinkX) is not supported with SoundGrid.

	Careful Using
1	NETGEAR GS108 V4 8-Port Switch (Only Broadcom chip)	기기간 연결이 해제되는 경우 해당포트가 인식불능이 되는 경우가 있으며, 이 문제를 해결하기 위해서는 장치의 재부팅이 필요합니다. Broadcom chip을 사용하지 않은(ex: Realtek chip) 다양한 버전이 존재하며, 이 경우 DiGiCo 콘솔과 호환성에 문제가 발생할 수 있습니다. 해당 제품의 경우 시리얼넘버의 시작이 3TX가 아닐 경우 Broadcom chip이 사용되지 않은 모델이니 사용시 주의해여 합니다.
2	NETGEAR JGS516 v2 - 16-Port Switch	DiGiCo 콘솔과 사용하는 경우, 콘솔에서 네트워크 설정 변경을 반드시 진행해야 합니다. https://assets.wavescdn.com/pdf/hardware/digico-sd-consoles-netgear.pdf

	Not Supported with DiGiCo SD consoles.
1	DLink DGS-1210-10P
2	NETGEAR GS110TP V3 10 port switch
3	TP-Link TL-SG108 (v2.0) 8-port switch
4	TP-Link TL-SG3210 (v3) 8-port switch

Network Switches for SoundGrid Systems

Certified Network Switch

Careful Using

Not Supported with DiGiCo SD consoles.