Specifications
GENERAL
Type : Active subwoofer
Transducers : 2x 21” Neodymium magnet woofer with 5.31” voice coil
Frequency Response (1) : 25 Hz – 120 Hz (-6 dB)
Maximum SPL (2) : 148 dB peak
Coverage : Omni
Connectors : Analog, AES3 and Remote control: Easy-grip metal locking LK25 connector (MIL C 5015 and VG95234 spec.)
Control : Remote control with dedicated PC software via Ethernet
DIGITAL SIGNAL PROCESSOR
Built-in DSP : Input gain, delay up to 2 s, Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for digital beam steering Level and Temperature remote monitoring
AMPLIFIER
Type : Switching-mode, class D with IPAL® technology
Output power : 8500 W @ 1 Ω
Power consumption : 400 VA
Protections : Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting,
Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Operating range : 100-240V AC, 50-60 Hz with PFC
Mains connector : powerCON with link inlet
HANDLING AND FINISHES
Dimensions (W x H x D) : 1420 x 600 x 775 mm (55.90 x 23.6 x 30.5 in)
Weight : 148 kg (326.3 lb)
Material : Wood
Color : Black, Custom RAL
REGULATIONS
IP Rating : Speaker Box: IP45 / Electronics: IP65
Notes for data:
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
New materials and design are introduced into existing products without previous notice.
