The Firenze-KH8 is a powerful, top-of-the-line touring system featuring Slim Array Technology (SAT) and Electronic Beam Steering (EBS). Self-powered and weather resistant, the KH8 produces an exceptional peak output of 145 dB SPL and is fully controlled by 8 onboard DSPs for maximum operational flexibility offering a unique solution to the live sound market.

The state-of-the-art rigging system allows you to pre-cable stacks of 3 units to fly a straight 24-unit cluster in less than 10 minutes. This is possible because it is not necessary to dismount the entire cluster: the speakers are anchored in groups of three within rigid frames that can be connected quickly to create longer clusters. Compared to traditional systems that require wiring and a mechanical connection for each speaker, the KH8 cuts down on time for a cost-sensitive solution.



Type : Active line array element

Transducers : 8x 8” Neodymium magnet woofer with 2.5” voice coil

  •                        8x 4” Neodymium magnet drivers with 1.5” voice coil
  •                        4x Neodymium magnet compression driver with 1.5” voice coil

Frequency Response (1) : 70 Hz – 18 kHz (-3 dB)  

Maximum SPL (2) : 145 dB peak

Coverage : Horizontal: 120°  

                   Vertical: digitally adjustable with Electronic Beam Steering 

Connectors : Analog, AES3 and Remote control: Easy-grip metal locking LK25 connector (MIL C 5015 and VG95234 spec.) 

Control : Remote control with dedicated PC software via Ethernet 


Built-in DSP : Input gain, delay up to 2 s, Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), 

                      FIR filter for digital beam steering Level and Temperature remote monitoring 


Type : 4-ch., switch mode, class D

Output power : 8x 2000 W @ 4 Ω 1% THD+N

Power consumption : 1250 W @ 4 Ω load, Pink noise 1/8 rated power

Protections : Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, 

                     Clip Limiter/Permanent Signal Limiter, High Frequency Protection

Operating range : 100-240V AC, 50-60 Hz with PFC

Mains connector : powerCON with link inlet


Dimensions (W x H x D) : 1170 x 500 x 226 mm (46.1 x 19.7 x 8.89 in) 

Weight : 75,2 kg (159.84 lb) 

Material : Stainless Steel 

Color : Black, Custom RAL


IP Rating : Speaker Box: IP45 / Electronics: IP65 

Notes for data:

(1) With dedicated preset

(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m

New materials and design are introduced into existing products without previous notice.