The Mugello-KH3 is the medium format mid-high line array element offered in our Concert Series. The self-powered speaker is comprised of two 12” neodymium magnet woofers with a 2.5” voice coil each and two compression drivers with a 2.5” voice coil each.

Boasting the most versatile size of the Mugello line, the Mugello-KH3 has the ability to drive sound further, ensuring exceptionally high performance with a peak SPL of 138 dB perfect for a variety of applications of medium scale.



Type : Active line array element

Transducers : 2x 12” neodymium magnet woofer with 2.5” voice coil / 2x compression driver with 2.5” voice coil 

Frequency Response (1) : 120 Hz – 19 kHz (-6 dB)

Maximum SPL (2) : 138 dB peak

Coverage : V. 20° | H. 110°

Connectors : Analog: 2x XLR (bal) input signal + 2x XLR (bal) parallel output.

                     Digital: 1x XLR AES3 input + 1x XLR AES3 output

Control : Remote control with dedicated PC software via USB or RS485..Onboard touch screen display.


Built-in DSP : Input gain, delay up to 330 ms, 8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), 

                      FIR filter for electronic beam steering Onboard preset, Level and temperature remote monitoring


Type : 2-ch., switch mode, class D

Output power : 2x 1600 W @ 4 Ω 1% THD+N

Power consumption : 300 W @ 8 Ω load, Pink noise 1/8 rated power

Protections : Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, 

                     Clip Limiter/Permanent Signal Limiter, High Frequency Protection

Operating range : 100-240V AC, 50-60 Hz with PFC

Mains connector : powerCON with link inlet


Dimensions (W x H x D) : 1218 x 456 x 210 mm (47.9 x 17.9 x 8.2 in) with rigging hardware 

                                          1104 x 370 x 200 mm (43.5 x 14.5 x 7.9 in) net dimensions 

Weight : 43,6 kg / 96,12 lb (with rigging hardware) 

Material : Wood

Color : Black, White, Custom RAL 


IP RatingIP20 (IP53 with K-AMPCOVER accessory)

Notes for data:

(1) With dedicated preset

(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m