The Mugello-KH2 is the smallest mid-high line array element offered in our flagship line. The self-powered speaker is comprised of two 8” neodymium magnet woofers each with a 2.5” voice coil and two 1.4” compression drivers with a 2.5” voice coil each.
However small in size, the Mugello-KH2 delivers a really large sound, ensuring exceptionally high performance with a peak SPL of 136 dB. Measuring at 735 x 285 x 200 mm (net dimensions), this compact speaker is a perfect solution for applications in intimate concert halls, theaters and clubs.
GENERAL
Type : Active line array element
Transducers : 2x 8” neodymium magnet woofer with 2.5” voice coil.2x compression driver with 2.5” voice coil
Frequency Response (1) : 120 Hz – 19 kHz (-6 dB)
Maximum SPL (2) : 136 dB peak
Coverage : V. 20° | H. 110°
Connectors : Analog: 2x XLR (bal) input signal + 2x XLR (bal) parallel output.
Digital: 1x XLR AES3 input + 1x XLR AES3 output
Control : Remote control with dedicated PC software via USB or RS485..Onboard touch screen display.
DIGITAL SIGNAL PROCESSOR
Built-in DSP : Input gain, delay up to 330 ms, 8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for electronic beam steering Onboard preset, Level and temperature remote monitoring
AMPLIFIER
Type : 2-ch., switch mode, class D
Output power : 2x 1000 W @ 8 Ω 1% THD+N
Power consumption : 300 W @ 8 Ω load, Pink noise 1/8 rated power
Protections : Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting,
Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Operating range : 100-240V AC, 50-60 Hz with PFC
Mains connector : powerCON with link inlet
HANDLING AND FINISHES
Dimensions (W x H x D) : 860 x 370 x 210 mm (33.8 x 14.6 x 8.2 in) with rigging hardware.
735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in) net dimensions
Weight : 29 kg / 63.93 lb (with rigging hardware)
Material : Wood
Color : Black, White, Custom RAL
REGULATIONS
IP RatingIP20 (IP53 with K-AMPCOVER accessory)
Notes for data:
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
New materials and design are introduced into existing products without previous notice.
