Redundant 19" AES To LiNET Converter
GENERAL
Number of output channels | 4 |
Output stage | Class D |
Internal samplerate / bit-depth | 96 kHz / 24 bit |
Output-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input) | >108 dB (unweighted) >111 dB (A-weighted) |
Signal-to-noice ratio (22 Hz – 20 kHz, 4 Ω – digital input) | >116 dB (unweighted) >119 dB (A-weighted) |
Frequency response (8 Ω load with CLEAR preset) | 20 Hz – 20 kHz = (+0.0 dB /-1.0 dB) |
THD+N & IMD (4 Ω load @ 1/2 output power) | 20 Hz – 20 kHz = < 0.005% |
Latency (input to loudspeaker output) | Minimum 2.70 ms AES/EBU input Minimum 2.00 ms analogue input |
Protection circuits | Inrush current limiter Thermal limiter Output DC SMPS over-current Output overload |
LED indicators | Mute status Limit Signal Sensor Protection Ethernet control active Digital signal locked Dante™ Power on |
Ethernet connection | 2 x 100 Mbps RJ45 Control 1 x 100 Mbps RJ45 DANTE™ |
AC mains input connector | Neutrik 32A powerCON® |
AC mains voltage (high range)** (dual voltage SMPS with automatic voltage range selection) | 180 V = Minimum 230 V = Nominal 265 V = Maximum |
AC mains voltage (low range)** (dual voltage SMPS with automatic voltage range selection) | 90 V = Minimum 115 V = Nominal 132 V = Maximum |
AC mains frequency | 47 – 63 Hz |
Power consumption* (1/4 power = 600 W @ 4 Ω to represent typical music signal) | Amplifier in standby = 17.6 W Amplifier idle = 191 W Amplifier ¼ power = 3200 W |
Input sources | Analogue & AES/EBU & Dante™ |
Analogue input impedance (balanced) | 12 kΩ |
Maximum input level (analogue differential) | +18 dBu / 6.15 Vrms |
Input connections | 4x XLR3 Analogue IN 2x XLR5 Sensor IN 1X RJ45 LINET IN (8x CH) 1x RJ45 LINET LINK (8x CH) 1x RJ45 DANTE IN (4x CH) |
Supported digital input formats (internal SRC) | 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz |
RMS output power* (20 Hz – 20 kHz, THD <0.01%) (all channels driven) | 1800 W @ 8 Ω 3500 W @ 4 Ω 4400 W @ 2.7 Ω 4500 W @ 2 Ω |
Peak output power* (20 Hz – 20 kHz, 6 dB Crest Factor) (all channels driven) | 3600 W pk @ 8 Ω 7000 W pk @ 4 Ω 6500 W pk @ 2.7 Ω 5200 W pk @ 2 Ω |
Maximum output voltage* | +/- 170 V pk |
Maximum output current* | +/- 52 A pk |
Damping Factor (8 Ω load, 1 kHz & below) | 2500 |
Minimum output load | 2 Ω nom 2.7 Ω for sensor control |
Power output connections | 2x Neutrik NL4 speakON® 1x Neutrik NL8 speakON® |
Operating temperature | +5°C to +55°C 41°F to 131°F |
Thermal output (BTU/h) | 679.02 = Idle 2470.39 = 20 % 5159.16 = 50 % 9635.88 = 100 % |
Thermal output (kWh) | 0.199 = Idle 0.724 = 20 % 1.512 = 50 % 2.824 = 100 % |
Cooling | 2x thermally controlled fans Hot air expelled at rear |
Dimensions (WxHxD) | 483.5 x 88 x 454.18 mm / 19.04” x 3.46” x 17.88” (2 Rack units) |
Shipping Dim. (WxHxD) | 675 x 130 x 560 mm (0.049 m³) / 26.57” x 5.12” x 22.05” |
Net Weight | 14.75 kg / 32.5 lbs |
Shipping weight | 17.5 kg / 38.6 lbs Volume = 0.049 m3 / 1.73 ft3 |
* Typical values – some variation may exist due to component tolerances.
**Voltage range should not be exceeded. Amplifier output power performance will degrade below nominal voltage & increase above nominal voltage.