High Output 3-way Bi-Amplified Line Array System
| Type: | High Output 3-way Bi-Amplified Line Array System |
| Frequency response: | 50 Hz – 22 kHz (-6 dB) |
| Power handling AES / peak (passive): | Bi-amplified only |
| Low AES / peak: | 2000 W / 8000 W |
| Mid / High AES / peak: | 300 W / 2600 W |
| Sensitivity low 1W / 1m: | 103 dB |
| Sensitivity mid / high 1W / 1m: | 114 dB |
| Maximum peak SPL (with LINUS10) | |
| Low: | 143 dB |
| Mid / High: | 148 dB |
| Amplification, Cabinets per Amplifier: | |
| LINUS14D Optimum / Maximum: | 4/6 |
| LINUS10 Optimum / Maximum: | 2/3 |
| Dispersion horizontal: | 90°, 120° or asymmetrical 105° |
| Dispersion vertical: | Array dependent: 0°, 0.5°, 1°, 2°, 2.5°, 3° to 8° in 1°-steps |
| Components: | |
| Low frequency: | 2x 12″ neodymium, water resistant cones, 4″ (101.6 mm) voice coil, 1000 W (AES) each |
| Mid/High frequency: | 2x 6″ DDP (Double Diaphragm Planar-wave-drivers) |
| Mid: 3.5″ (90 mm) voice coil, 150 W (AES) each | |
| High: 1.75″ (44.4 mm) voice coil, 80 W (AES) each | |
| Crossover point: | 400 Hz bi-amp, 6300 Hz passive |
| Input connectors: | 2x Neutrik™: 1x Input + 1x Link Cable |
| Nominal impedance LF / MF+HF: | 8 Ohm (1+/1-) / 16 Ohm (2+/2-) |
| Enclosure material: | Birch plywood |
| Finish: | Polyurea coating (water resistant) |
| Suspension: | Flying hardware integrated |
| IP rating (IEC 60529) | Standard: IP55 (Amphenol connectors) Standard: IP54 (Speakon NL4MLP) |
| Weather proof options | MG1 (Marine Grade 1): IP55 |
| Dimensions (WxHxD): | 674 x 356 x 555 mm / 26.54 x 14.02 x 21.85″ (674 x 400 x 555 mm / 26.54 x 15.75 x 21.85″ incl. hardware) |
| Net weight: | 40 kg / 88.18 lbs |
* Measured with pink noice 6 dB crest factor.Half-space loading.